Automation Server - Fax Boards

Question: What types of Fax Serial boards do you recommend for use with TeleMagic’s Automation Server?

Answer: Almost any fax serial board that offers Class 1 or Class 2 fax modem capability should work with TeleMagic. A few of the tested fax serial boards by TeleMagic’s Research & Development department are outlined below:

TeleMagic R&D is pleased to introduce Chase PCI-RAS Multimodem card. This product now has been fully tested and approved to work with the Automation Server.

The installation was very easy and in just a few minutes we had the board up and running. During our 2 weeks of broadcast fax on Windows NT workstation, we found the unit very reliable.

If you do broadcast fax with Automation Server, you would definitely want to look at this product.

Chase PCI-RAS: http://solutions.sun.com/.

CHASE RESEARCH offers simultaneous V.90 and K56 Flex support in the versatile PCI-RAS Multimodem Card. With support for Win 95, 98, NT, Unix, Linux, and Solaris, this 4- or 8-modem plug-n-play card brings convenient RAS to the small to medium business needing 4-64 modems for fax, dial-up or dial-out support.

PCI-RAS supports Class 1 and 2 faxing, and has routinely displaced BrookTrout, Dialogic and Digi cards as a result of its high performance and low cost.

The Chase adapters (4 and 8 port models) install in a standard PCI slot and include all software and hardware necessary to be up and running in minutes.

RocketModem II Multimodem by Comtrol: http://www.comtrol.com/.

TeleMagic R&D is pleased to introduce RocketModem II Multimodem card by Comtrol. This product now has been fully tested and approved to work with the Automation Server.

The installation was very easy and in just a few minutes we had the board up and running. We installed this board on a Windows NT workstation running TeleMagic Automation Server. During our few weeks of testing and over 1500 faxes, this board proved to be very reliable.

If you do broadcast fax with Automation Server, you would definitely want to look at this product. For more information and to order your unit, please visit www.comtrol.com.

DigiBoard: http://www.digiboard.com.

Digiboard also provides both 4 & 8 Port fax boards that TeleMagic has continued to operate with since the initial release of Fax Interface within the Automation Server.

 

-- End of FAQ #693

FAQ ID #693

Product Related: TeleMagic 4.x

Last Updated: March 25, 2000